Silver Gloss Splashback (2420mm x 1200mm x 11mm)
Kitchen splashback in a Silver Gloss Finish on an MR MDF core.
Our splashbacks are manufactured in a larger (2420 x 1200 x 11mm) board than many of our competitors. This normally minimises the number of joints required in the splashbacks around a standard kitchen installation. The panels can be easily cut with a standard jigsaw or handsaw by a carpenter or DIY enthusiast. One panel can be cut in length to make nearly 5 linear meters of splashback at a standard 600mm height, or indeed can allow for the area behind a hob or cooker to be cut out and covered with no need for joints (depending on the dimensions of your kitchen.)
Rearo Kitchen Splashbacks are made and designed for use in a hot Kitchen enviroment, having Class 2 surface spread of flame as standard BS476 Part 7 rating. However to allow for thorough cleaning with liquid detergent solutions it is always best to fit spashbacks to waterproof standards. This will also ratify our 10 year manufacturer's guarantee on this product. Therefore we recommend you install your Rearo splashback following the waterproof shower panel fitting guide enclosed.
Your Rearo splashback panel is also made to the same thickness as our shower panel range and can therefore use the same selection of finishing trims should you need to join panels or require end trims to complete the look of your installation. These can be found in the Accessories section.