Click image to view full
Our splashbacks are manufactured in a larger (3000 x 1200 x 11mm) board than many of our competitors. This normally minimises the number of joints required in the splashbacks around a standard kitchen installation. The panels can be easily cut with a standard jigsaw or handsaw by a carpenter or DIY enthusiast. One panel can be cut in length to make just over 6 linear meters of splashback at a standard 600mm height, or indeed can allow for the area behind a hob or cooker to be cut out and covered with no need for joints (depending on the dimensions of your kitchen.)
Due to the many variations in monitors and browsers, colour samples may appear different on different monitors. Computer monitors are not all calibrated equally and colour reproduction on the Internet is not precise. Since it is not possible to guarantee our online colours will look the same on all computers, we do not guarantee that what you see accurately portrays the colour or texture of the actual product. If you are unsure we would therefore recommend that you request a physical sample from our free sample service so that you can see how the product looks and feels in the lighting of your own home or where the product is to be installed.